|
|
|
|
|
 |
MaxiMill HFC
’Feed matters’, rapid milling
|
 Product features - Characteristics
|
 |
Long service life - Tool coating ‘hard & tough’
The tool coating is extremely hard and tough at the same time, so wear resistance and resistance to corrosion is guaranteed and an increase in the life of the tool is achieved. |
Coolant holes designed for economic lubrication
• Tapered coolant exit hole for minimum quantity lubrication.
• Suitable for minimum quantity lubrication.
• Increased flexibility when choosing the coolant (air, mist or lubricant).
Optimum position of coolant exit hole close to the cutting edge. Reduced tool and work piece heating. Support for chip evacuation when milling deep pockets. Central coolant supply in all tools. |
 |
 |
Security first the CERATIZIT concept
The security package comprises robust clamping screws, torque screwdrivers and extensive measurement of the centrifugal forces during the development process.
The system is suitable for high feed cutting. The security of the operator as well as process security is guaranteed. |
Maximum tool life - HyperCoat coating
CTP 1235
CTP 2235
CTC 3215
SR 226 + |
 |
 |
Reduced machining noise and vibration - Light cutting geometries
Extremely positive cutting angle:
Soft cutting and reduced cutting noise! The cutting forces are mainly in the axial direction:
Even with long overhang lengths there is almost no vibration, and little stress on the machine spindle. |
Learn more
Services
|
|
