Language selection
×
Search
Language
Home > Products > Metal cutting > Milling > Solid carbide milling > For aluminium machining

Maximum performance for light metals

Excellent surface quality

Large polished chip flutes with special grades to ensure ideal chip evacuation and reduced edge build-up

Maximum metal removal rate

Thanks to their optimised geometries, our solid carbide milling cutters are suitable for the high-speed machining of aluminium and non-ferrous metals

- End mills diameter range from 0.5 - 20 mm

- Available in various lengths and types of peripheral cutting edge and other cutting edges (sharp, corner chamfer, corner radius and ball nose cutters) - with or without reduced neck diameter

- With various shank types

- With or without through coolant

- PCD solid carbide end mills, ball nose and torus milling cutters

End mills

HPC-SF: irregular helix and pitch of the helix for reduced noise and vibration during milling operation up to a tool overhang of 6xD

SF: regular pitch, pitch of the helix and special geometry of the peripheral cutting edge for reduced cutting forces

SFM: reduced cutting edge length and total length for maximum stability

PCD tools

PCD milling cutters with various numbers of teeth

Available in various lengths and cutting edge types

With or without through coolant

Rough milling cutters

Irregular helix and roughing profile on the peripheral cutting edge for increased metal removal rates, reduced cutting forces and short chips

Large polished chip flutes for ideal chip evacuation

Ball nose milling cutters

End mill for copy milling and shoulder milling with larger corner radii

Torus end milling cutters

Irregular helix and pitch of the helix for minimal vibration and noise and high stability

Milling cutters with various corner radii and lengths available

Micro mills

End mills in the diameter range from 0.5. - 2.0 mm in various lengths and cutting edge types

High dimensional accuracy due to close manufacturing tolerances

High-precision finish milling cutters

Solid carbide milling cutters with a high number of teeth for finishing

Tool overhang up to 6xD and substantial depth of cut possible

Single flute milling cutters, chamfer milling cutters and deburring cutters

Suitable for unstable clamping and profile machining due to very soft cutting action

Various point angles available

Particularly suitable for the following materials:

- Aluminium

- Magnesium

- Copper

- Brass

- Bronze

- Ampco metals

- Composite materials (PCD only)

HPC end mills W0360

Material: AlCuMg

Application: pocket milling

Cutting parameters:

Vc = 1,130 [m/min]

Vf =  7.0 m (roughing)

         8.5 m (finishing)

         14.0 m (surface profile)

The machining time is 55 seconds for a pocket depth of 60 mm

Cutting Tools
Complete Range
No. 600

Solid carbide tools
Milling / Drilling / Reaming
No. 587

Programme Extensions
Cutting Tools 2016.2
No. 640

Programme Extensions
Cutting Tools 2016.1
No. 640

Product family Filter products

54 out of 54 products

News & Press: